Big Foot BFCB 10-1/4-Inch 36 Tooth ATB Saw Blade with 5/8-Inch and Diamond Knockout Arbor

Big Foot BFCB 10-1/4-Inch 36 Tooth ATB Saw Blade with 5/8-Inch and Diamond Knockout Arbor Review

Buy From Amazon.com

Big Foot BFCB 10-1/4-Inch 36 Tooth ATB Saw Blade with 5/8-Inch and Diamond Knockout Arbor Feature

• 36 teeth for faster, more accurate cuts
• Carbide-tipped for finer cuts and longer blade life
• Diamond center hole for use with diamond center saws
• 10 1/4" Blade great for framing, decking, and fencing

If you've got a Big Foot, you've got to have this blade. It's light but tough as nails, and it's definitely one of the thinnest kerfs we've ever seen. Three dozen razor-sharp, hungry carbide teeth practically melt the stick away, no matter if you're feeding two 2x6s or just a 2x4. A professional carpenter invented the Big Foot, and it's been a favorite of carpenters, framers, and remodelers. The blades are relatively new--manufactured by Tenryu, known for smoothness and accuracy. Diamond center saw? No problem. There's a knockout that will adapt the blade for you.--Kris Jensen-Van Heste


10-1/4" 36 Tooth Carbide Blade. This monster blade features a diamond knockout center, which makes it a terrific tool for framers and the only blade for your Big Foot Saw.

Buy From Amazon.com

Festool KS 120 Dual Compound Sliding Miter Saw + CT 48 E Dust Extractor Package

Festool KS 120 Dual Compound Sliding Miter Saw + CT 48 E Dust Extractor Package Review

Buy From Amazon.com

Festool KS 120 Dual Compound Sliding Miter Saw + CT 48 E Dust Extractor Package Feature

• CT 48 Capacity: 12.7 gallon (48 L)
• CT 48 Dimensions (LxWxH): 38.5" x 6.5" x 28.75"
• CT 48 Weight: 29.8 lbs.
• CT 48 Power Cord 12 AWG: 24.5' length

The new CT48 incorporates increased capacity, innovation and versatility into this new design. With the dual mode power activation, the user chooses either a tool activated or manual activated start-up. This CT (Cleantec) unit is extremely mobile, with a sturdy chassis, extra large low abrasion rear tires, and double swivel casters up front to easily negotiate any obstacle. The CT48 dust extractor can be secured in place with a single point foot brake. The filter bags have even been redesigned to be self cleaning. These bags inflate and deflate with the cycling of the unit for maximum suction force and efficiency. An integrated hose garage has been added for easy hose storage. As with all Festool dust extractors, the CT48 utilizes the Sys-Dock system that facilitates the use/storage of one or more Systainers to the top of the unit. It will work wet or dry with no complex conversion, and it is remarkably quiet. Includes: CT 48E - 12.7 gallon HEPA Mobile Dust Extractor, HEPA filter, (1) fitted self-cleaning filter bag, and (1) 1 1/16" x 11.5 antistatic suction hose. The Festool Kapex miter saw comes with Festools high-quality 60-tooth carbide blade for use when cutting woods or soft plastics , the angle transfer device, a hold-down clamp for securing material, and a wrench for unit adjustments. Compact and lightweight at 21.5 kg (47 lbs). Use the fine adjustment knob to control bevel angles in fractions of a degree. The bevel knob has three settings: positive detents at 0 and -45 degrees, free movement between -45 and +45 degrees, and free movement up to +/- 47 degrees. Bevels can be made to the left or right, and the bevel gauge appears on both sides of the saw.

Buy From Amazon.com

REPR Fstnl Miter Saw J1G-ZP-305-62 Torsion Spring

REPR Fstnl Miter Saw J1G-ZP-305-62 Torsion Spring Review

Buy From Amazon.com

REPR Fstnl Miter Saw J1G-ZP-305-62 Torsion Spring

Buy From Amazon.com

Forrest MM10106 Miter Master 10-Inch 100 Tooth 5/8-Inch Arbor .105-Inch Kerf Wood Cutting Circular Saw Blade

Forrest MM10106 Miter Master 10-Inch 100 Tooth 5/8-Inch Arbor .105-Inch Kerf Wood Cutting Circular Saw Blade Review

Buy From Amazon.com

Forrest MM10106 Miter Master 10-Inch 100 Tooth 5/8-Inch Arbor .105-Inch Kerf Wood Cutting Circular Saw Blade Feature

• No splinters cross-cutting oak, ply veneers and melamine
• Cuts in all directions- rip, cross-cut, miter, any depth.
• Cuts all sized grooves 1/4" through 29/32" increments. (Set of plastic adjusting shims also included)
• Super-hard carbide gives up to 300% longer life, especially good on plywoods and abrasive particle-boards.

Forrest's blades offer a superior cut that leaves a rip-cut saw edge that is as smooth as if it had been sanded, and a cross-cut edge that is almost mark-free. The blades run very quietly, and backside tearout in plywood is negligible. Each blade is virtually hand-made. The plate is hand-tensioned (up to 15 minutes per blade), superior C-4 carbide teeth are hand-brazed to the plate, and the blade is straightened and restraightened multiple times throughout the process. Think of a Forrest blade as a tool in your shop, not an accessory. Forrest stands behind it's blades by offering a sharpening service that bring blades back to the exact tolerances offered in a new blade. And this same exacting service is available for other manufacturer's blades as well, so they should come back better than new. Recommended for: thin, low pressure, two-sided laminates, plywood & fine cross cutting on all woods. Eliminates need for a small scoring saw blade on table saw work. The 40° points slice through thin bottom layers with no tears or chips. Reduced yearly sharpening costs - less machine downtime.No splinters cross-cutting oak, ply veneers and melamineCuts in all directions- rip, cross-cut, miter, any depth.Cuts all sized grooves 1/4' through 29/32' increments. (Set of plastic adjusting shims also included)Super-hard carbide gives up to 300% longer life, especially good on plywoods and abrasive particle-boards.

Buy From Amazon.com

Hitachi 726213 Tool Mount for UU610 Miter Saw Stand

Hitachi 726213 Tool Mount for UU610 Miter Saw Stand Review

Buy From Amazon.com

Hitachi 726213 Tool Mount for UU610 Miter Saw Stand Feature

• Increases your versatility at the saw stand
• Allows you to attach a separate tool to the stand
• Heavy-duty construction
• Provides 3 positions: tight, slide and unlock
• Made for use with Hitachi No. UU610 Universal Miter Saw Stand

The Hitachi Miter Saw Stand Tool Mount for UU610 increases your versatility at the saw stand. Built for heavy duty construction, this tool mount allows you to attach a separate tool to the stand to be used alongside the miter saw. This unit provides three positions: tight, slide and unlock. Simply place the saw on the mount, move it to where you want it, and lock it solid. This mount also includes its own feet for independent use form the saw stand.


726213 Features: -Universal Tool Mount for UU610.-Universal Work Station accessories.-Fits all miter saws, cam lock for ''drop on'' mounting. Includes: -Includes rubber feet.

Buy From Amazon.com

Festool Package Deal Kapex Sliding Miter Saw with MFT/3 Kapex Table

Festool Package Deal Kapex Sliding Miter Saw with MFT/3 Kapex Table Review

Buy From Amazon.com

Festool Package Deal Kapex Sliding Miter Saw with MFT/3 Kapex Table Feature

• Money saving package versus purchasing individually.
• 10" Blade with extended capacity capability up to 4-4/3"
• Dual lasers & Dual-bevel sliding compound miter saw
• Fine bevel adjustment with upfront control
• Includes MFT/3 Kapex Table

The Festool Kapex miter saw comes with Festools high-quality 60-tooth carbide blade for use when cutting woods or soft plastics , the angle transfer device, a hold-down clamp for securing material, and a wrench for unit adjustments. Compact and lightweight at 21.5 kg (47 lbs). Use the fine adjustment knob to control bevel angles in fractions of a degree. The bevel knob has three settings: positive detents at 0 and -45 degrees, free movement between -45 and +45 degrees, and free movement up to +/- 47 degrees. Bevels can be made to the left or right, and the bevel gauge appears on both sides of the saw. The Kapex blade creates a thin kerf which reduces load on the motor and improves the cut quality. The blades are specially designed to reduce noise levels and dampen vibration. The large 30mm arbor hole reduces blade deflection. A special cutting position allows the Kapex to have a cutting capacity as large as 4-3/4" (120mm). The deck height of the Kapex matches the height of our Systainer 1 storage containers. On the job site, you can use one or more systainers to support the material being cut. The difference in height between the MFT/3 and MFT/3-Kapex multifunction tables is also equal to the height of the deck providing optimal work flow and support. The Magnesium alloy base of the Kapex was designed to be extremely rigid and durable yet very lightweight. Rubber feet in each corner provide useful traction and fit into the grid hole pattern of any Festool multi-function table. Features Festools patented FastFix blade change system. Turning the FastFix knob locks the arbor, mechanically locks out the trigger, and allows the blade to be changed with a single hand. Dual-line lasers define the entire cut area. This package includes the Multi-function Table to provide a strong, sturdy, portable worktable whose guide rail, dual position fence, swivel unit, and stops make clean cuts and precise angles fast and easy.

Buy From Amazon.com

TABLE SAW TAPER JIG By Peachtree Woodworking - PW1254

TABLE SAW TAPER JIG By Peachtree Woodworking - PW1254 Review

Buy From Amazon.com

TABLE SAW TAPER JIG By Peachtree Woodworking - PW1254 Feature

• Aluminum construction with built in scale and fully adjustable
• Backside stop to hold wood in place
• Can be assembled for either left or right hand use.
• 3" taper per foot with overall length is generous 24"
• Use with your rip fence to cut tapers up to 15 degrees

When you need to make that slightly angled cut that is to long for your miter or chop sa3w, use the taper jig to make the job easier. Constructed of aluminum, this taper jig includes a built in scale & is fully adjustable. Can be assembled either right or left hand use. Overall length is a generous 24" with a 3" taper per foot.

Buy From Amazon.com