Makita LS1216LX 12-Inch Dual Slide Compound Miter Saw with Laser and Stand

Makita LS1216LX 12-Inch Dual Slide Compound Miter Saw with Laser and Stand Review

Buy From Amazon.com

Makita LS1216LX 12-Inch Dual Slide Compound Miter Saw with Laser and Stand Feature

• 4-steel rail sliding system and 6 linear ball bearings deliver adjustment-free dead-on cuts
• Exclusive 5-1/2-inch tall dual sliding fence system features upper and lower fence adjustment
• Independent micro fine laser with on/off switch indicates line of cut left or right of blade
• Includes 5-position jobsite miter stand with 9-foot material extensions for easy jobsite portability
• Cuts 8-inch crown molding (vertically nested), 6-1/2-inch baseboard (vertical), 15-inch crosscuts at 90 degrees

The Makita LS1216LX combines the LS1216L 12" dual slide miter saw and the largest crosscutting and crown cutting capacity in its class with the convenience and mobility of Makita's jobsite miter saw stand. The LS1216L miter saw has a patented 4-Steel Rail Sliding System that further increases rigidity to produce superior cuts, and an exclusive 6 linear ball bearing design for smooth, adjustment-free, "dead-on" accurate cuts. The LS1216LX miter saw and stand is ideal for jobsite use, as well as high-production/manufacturing settings.

View larger

LS1216LX Features CAPACITY - 8" crown molding (vertically nested) and 6-1/2", baseboard (vertical) and 15" crosscut at 90° ACCURATE - Exclusive 6 linear ball bearings and 4-steel rail system deliver maintenance-free "dead-on" accurate cuts VERSATILITY - 5-1/2" tall fence system features upper and lower fence adjustments for more precise cuts DURABILITY - Powerful 15 AMP direct drive motor requires less maintenance than belt-driven saws INCLUDES - Blade, dust bag, vertical clamp, wrench, triangle, and stand

Tool Specifications Blade diameter 12" Arbor 1" Crown molding (nested) 8" Baseboard (vertical) 6-1/2" Max. cutting capacity (90°) 3-5/8" x 15" Max. cutting capacity (45° L/R ) 3-5/8" x 10-1/2" No-load speed 3,200 RPM AMPs 15.0 Dimensions (LxWxH) 31-3/4" x 25-1/4" x 28-3/8" Net weight (saw and stand) 135.4 lbs.

Large Cutting Capacity, Increased Accuracy
The LS1216L will crosscut boards up to 15" wide at 90°, right out of the box with no special setup required. It has an innovative direct drive gearbox and patented retractable guard system engineered for increased vertical cutting capacity and the largest crown molding cutting capacity (8" vertically nested) in its class. The patented retractable rear guard also provides 6-1/2" baseboard cutting capacity (vertical). In addition, the exclusive 6 linear ball bearings deliver smooth, solid and adjustment-free "dead-on" accurate cuts. The saw also has a patented 4-Steel Rail Sliding System that further increases rigidity to produce superior cuts, as the four steel rails provide less deflection. The result is a larger cutting capacity and more accuracy.

Precise Miter and Bevel Cuts
The LS1216L has an exclusive 5-1/2" tall sliding fence system, with four sliding fences featuring upper and lower fence adjustments for more precise miter and bevel cuts to accommodate a variety of cutting applications. The saw miters 0° to 52° left and 0° to 60° right, with positive stops at 0°, 15°, 22.5°, 31.6°, and 45° (left and right). The dual rear-handle bevel lock is easily accessible with adjustments 0° to 45° (left and right), with positive stops at 0°, 22.5°, 33.9°, and 45° (left and right). Precision adjustments are made easier with dual front bevel scales for improved visibility. The easy one-touch (push in and turn) miter lock system is designed for accurate adjustments and increased efficiency. For more precise cuts, a built-in laser indicates the line of cut, whether the blade is turning or not, and also includes an on/off switch and microadjustments for precise "left-of-blade" or "right-of-blade" cutting.

Ease-of-Use Features
In addition to the large cutting capacity, power, and accuracy, the LS1216L offers a range of conveniences and ease-of-use features. The LS1216L has a patented 4-Steel Rail Sliding System that requires less rear space than competitor dual sliding miter saws. The see-through blade guard system provides greater visibility of blade and line of cut, and has a one-step blade change process for increased efficiency. The ergonomic rubberized horizontal D-handle design has a better fit and added comfort, and the large trigger switch is designed for easier operation.

15 AMP Power for Smoother, Higher-Quality Cutting
The LS1216L has a 15 AMP direct gear box motor that never slips, bogs down, or requires maintenance like belt-driven saws. The soft start feature delivers smoother startups, and the Electronic Speed Control maintains constant speed under load for smoother, higher-quality cutting. The LS1216LX includes the Makita Jobsite Miter Saw Stand. The stand adjusts to five positions with a spring-loaded mechanism for quick and easy setups in seconds. It also includes a large platform base and 9' material support extensions with feed roller to support long crown molding. The stand is equipped with a large rubberized handle and solid rubber 12" wheels for easy jobsite portability.

Best in Class for a Range of Applications
The LS1216LX is engineered for precision tasks in woodworking shops, as well as for cutting large materials like 4" x 16" beams and wide boards up to 15". It is ideal for a broad range of tradespeople, including finish carpenters, professional woodworkers, case and base installers, cabinet installers, cabinet manufacturers, closet installers, decking and flooring professionals, siding installers, stair installers, and general contractors seeking a best-in-class 12" dual slide compound miter saw and stand for the jobsite or high-production/manufacturing setting.

About Makita's Miter Saws with DXT
Makita's new miter saws with DXT (Deep and eXact Cutting Technology) are designed with an innovative direct drive gearbox and patented retractable guard system that are engineered for large vertical cutting. In addition, the exclusive 6 linear ball bearings deliver smooth, solid and adjustment-free "dead-on" accurate cuts. The saws also have a patented 4-Steel Rail Sliding System that further increases rigidity to produce superior cuts, as the four steel rails provide less deflection. The four steel rails also enable a more compact rear design than standard two-rail systems. Makita's new miter saws deliver a larger cutting capacity and more accuracy combined with a more compact rear design.

About Makita
Makita is a worldwide manufacturer of industrial-quality power tools, and it offers a wide range of industrial accessories. Makita applies leading-edge innovation to engineer power tools that are more compact and energy efficient, yet deliver industrial-strength power and results. Makita U.S.A., Inc. is located in La Mirada, California, and operates an extensive distribution network located throughout the U.S. For more information, please call 800-4-MAKITA (800-462-5482) or visit makitatools.com. Makita is Best in Class Engineering.

What's in the Box
Makita LS1216L 12-inch Dual Slide Compound Miter Saw, 60T TCT Saw Blade, Vertical Vise, Dust Bag, Triangular Rule, Wrench and Stand.



The Makita LS1216LX combines the LS1216L 12-inch dual slide miter saw and the largest crosscutting and crown cutting capacity in its class with the convenience and mobility of Makita's jobsite miter saw stand. The LS1216L miter saw has a patented 4-steel rail sliding system that further increases rigidity to produce superior cuts, and an exclusive 6 linear ball bearing design for smooth, adjustment-free, "dead-on" accurate cuts. The LS1216LX miter saw and stand is ideal for jobsite use, as well as high-production/manufacturing settings.

Buy From Amazon.com

Rockwell RK9000 Jawhorse

Rockwell RK9000 Jawhorse Review

Buy From Amazon.com

Rockwell RK9000 Jawhorse Feature

• The 1-ton clamping force provided by the jaws, which is foot-pedal operated, leaves hands free
• A lock-release switch locks material in place and easily releases with the flick of a switch
• Vice jaws extend to a full 37-inches to clamp even the largest materials, including a standard size 36-inch door
• Tripod base gives exceptional all-terrain stability; front legs incorporate holes to allow floor fastening for more permanent jobs
• Quickly folds down (no tools needed) to a portable 43 pounds; incorporates wheel for even easier portability

When you have a job to do that requires a second set of hands, you can turn to the Rockwell Jawhorse portable workstation clamping system. Whether you're sheetrocking, setting fence posts, or constructing an outdoor playhouse for your children, this unique hands-free portable workstation will help you get the job done.

The Rockwell Jawhorse Portable Workstation Clamping System offers: The ability to accomplish jobs without a second person A trademarked foot pedal that applies up to 2,200 lbs. of force Jaws that can be opened up to 37-inches wide A compact folding design for easy storage

You can hang doors and complete other tasks that used to take two people on your own. View larger.

The stable Jawhorse lets you hold awkward materials securely in place. View larger.

The Jawhorse can be neatly folded and transported. View larger.

Clever, Practical Design Makes Jobs Easier
Whether you're an occasional do-it-yourselfer or a professional contractor, the Jawhorse will clamp virtually anything you can imagine. The Jawhorse's serious clamping power lets you accomplish tasks that normally require two people on your own.

The strong and versatile Jawhorse can replace your workbenches, sawhorses, clamps, bench vises, and much more. You can use it to hold work materials in place as you tackle jobs like setting fence posts, hanging doors, installing crown moldings, and placing new sheetrock overhead. Even odd-shaped objects like engine blocks can fit neatly in the Jawhorse's grip.

Apply up to 2,200 Pounds of Force--Hands Free
The Jawhorse features a trademarked hands-free foot pedal that lets you apply up to one metric ton (2,200 pounds) of force, so you don't have to worry about materials slipping while you work. And the jaws can be opened up to 37-inches wide, which is enough to hold most doors securely in place. This gives you maximum flexibility on the job.

The Jawhorse also eliminates the need for individual saw stands and complicated vices. A variety of different saws can be locked into the sturdy jaws on this station, allowing you to make precise cuts quickly and safely--no awkward balancing of large boards or one-handed saw operation required. Patented rubber pads help keep you from denting or scratching wood the way you might using traditional vice clamps, making the Jawhorse ideal for finish work.

Durable, Dependable, and Easy to Transport or Store
The Jawhorse features solid all-steel construction along with an extra-wide stance, providing exceptional strength and stability in a wide variety of conditions. There are no moving plastic parts to break. And with a unique, three-legged design, the Jawhorse is easier to balance on uneven terrain than traditional four-legged sawhorses and mobile workbenches.

The Jawhorse is incredibly simple to use. You just set it up, lock it in place, and clamp your project materials or tools down. This quick and easy setup makes the Jawhorse ideal for use on remote worksites and for people who don't have the space in their busy home or apartment for a permanent workbench.

When not in use, the workstation folds down to a compact 29x14x13 inches for easy transport or storage in a small closet. And weighing in at just 43 pounds, it is easy to lift in and out of work rigs.

When unfolded, an integrated roller makes it incredibly easy to move around the workshop or the jobsite. There are holes in two of the three feet so that you can choose to bolt the Jawhorse down for frequent use in your workshop or on big job sites that require more permanence.

Available Accessories Provide Even Greater Versatility
Versatile accessories (sold separately) let you customize the Jawhorse to better meet your individual needs. You can use the Welding jaw to set up a full welding station. The Chainsaw jaw makes it easy to lock saws in place for sharpening, and Saddlebags let you keep all your tools neatly organized and within arms reach. You can also use the Plywood jaw to adapt the Jawhorse for large sheet goods up to 52-inches wide, or set up the Jawhorse as a reliable Miter Saw Station or a more permanent Work Table.

What's in the Box
Rockwell Jawhorse portable workstation clamping system.

Buy From Amazon.com

Irwin Industrial Tools 3061001 Miter Saw Laser Guide

Irwin Industrial Tools 3061001 Miter Saw Laser Guide Review

Buy From Amazon.com

Irwin Industrial Tools 3061001 Miter Saw Laser Guide Feature

• Retro-Fit your miter saw into a laser guided power tool
• Projects a laser guide line for accurate cuts
• Easy to install
• Automatic on and off with saw blade rotation
• Extra long bolts included

The Irwin Miter Saw Laser Guide fits onto most miter saws to create a laser-guided power tool. The guide projects a line just to the left of the cut to enable precise cuts and includes two batteries with a 1.5-hour life and extra-long bolts to secure the guide to your saw. It automatically turns on and off as the saw blade starts and stops rotating.


Convert your miter saw into a precision laser-guided power tool! Simple to install, just replace the saws outside blade washer with the self-aligning Laser Guide. The guide projects a clear line just to the left of the cut, and turns on and off automatically at 400RPM. No more "sneaking up" on a mark, just cut on the line. Will not fit Bosch, Rigid, ProTech, or DeWalt model 704 or 705 saws. Includes: Laser guide and batteries. Three different installation bolts to cover most applications. Hex key for battery installation. Soft sided storage case

Buy From Amazon.com

Precision Miter Box

Precision Miter Box Review

Buy From Amazon.com

Precision Miter Box Feature

• Precision Miter Box

Just 5-1/2" x 2", this Precision Miter Box is ideal for small and miniature work. It is made out of aluminum, with one 90-degree and two 45-degree cutting slots. For use with a razor sawblade such as H102.

Buy From Amazon.com

MK Morse CSM14MB 14-Inch Dry-Cut Metal Cutting Saw

MK Morse CSM14MB 14-Inch Dry-Cut Metal Cutting Saw Review

Buy From Amazon.com

MK Morse CSM14MB 14-Inch Dry-Cut Metal Cutting Saw Feature

• 14-Inch dry cut metal cutting saw performs cutting without sparks, noise, smell or heat build up
• Powered by low-speed, high-torque 1,300 RPM motor; ideal for pipe, angle iron, metal studs, conduit and tubing applications
• 72-tooth carbide blade cuts the metal instead of grinding it
• Includes safety guard, beveling vice, 6- and 8-millimeter hex wrenches, safety goggles, ear plugs and Metal Devil steel cutting blade
• On-board blade change wrench for convinent storage and reduced rick of loss

M.K. Morse CSM14MB 14-Inch Dry-Cut Metal Cutting Saw

If you are an electrician, a heating and air conditioning professional, a mechanical contractor, or a residential handyman this M.K. Morse Metal Devil dry cut saw is all the tool you need to quickly and safely cut any machinable metal. It is a must for every contractor. The Metal Devil is perfect for doing framing projects or complex pipe fitting work. It cuts through steel and other tough metals as easily as a traditional circular saw blade cuts through soft pine. These devils cut faster, cut cooler, and cut longer than most things you are used to seeing in industrial plants or at construction sites.

Cuts cooler: People are amazed to find how cool freshly cut metal edges are after cutting. The unique metallurgy of the carbide tips means there is minimal heat transferred to the inner plate.

Cuts faster: M.K. Morse Metal Devil cutting system cuts much faster than traditional abrasive wheels. It can cut through 6 inches x ¼ inch thick steel in approximately 12 seconds.

Cuts Longer: M.K. Morse Metal Devil cutting system works together with blades that have a hardened steel inner plate that is a unique combination of tungsten carbide and titanium carbide tips brazed to the teeth. As a result, M.K. Morse Metal Devil cutting systems offer exceptional wear resistance and make more cuts than most other cutting systems.

The M.K. Morse Company warrants each new product manufactured and sold by it or one its authorized distributors only against defects in workmanship and or materials under normal service, and proper installation and use. This warrantee is limited to repair or replacement of verified defective products and excludes any and all implied warranty of merchantability and all risk and liability whatsoever resulting from any use of said products, including incidental and consequential damages. There are no warranties which extend beyond the description on the face thereof. The provisions of this warranty and limitation of liability shall not be modified in any respect except by a written document signed by an officer of the M.K. Morse Company.

Metal Devil Cutting capabilities Shape of Material Depth of cut at 45 degree cutting angle Depth of cut at 90 degree cutting angle Round 4-1/8 inches 5-1/8 inches Square 3-1/2 inches x 3-1/2 inches 4-1/4 inches x 4-1/4 inch Rectangle 3-1/8 inches x 4-3/8 inches 3-3/4 inches x 7-1/4 inch

Durability test results Cut Material Size Number of Cuts / Area Angle Iron 2 inches x 2 inches x 1/4 inch 400 cuts / 375 square inches C-Channel 12 inches x 20.7 pounds / foot 40 cuts / 270 square inches Steel Plate 6 inches x 3/8 inch 58 cuts / 87 square inches Stainless steel plate 12 inches x 3/8 inch 13 cuts / 58.5 square inches

Whats in the box: Safety guard, mitering vice, 8 mm hex wrench, 6 mm hex wrench, safety gogles, ear plugs, M.K. Morse Metal Devil steel cutting blade M.K.Morse Metal Devil saw.

M.K. Morse CSM14MB 14-Inch Dry-Cut Metal Cutting Saw meets MC, ISO9002, and is CSA safety certified.

0 - 45 mitering vise. Plexiglass safety shield. Chip collection chamber. Retractable blade guard.

Buy From Amazon.com

Forrest WW10407125 Woodworker II 10-Inch 40 Tooth ATB .125 Kerf Saw Blade with 5/8-Inch Arbor

Forrest WW10407125 Woodworker II 10-Inch 40 Tooth ATB .125 Kerf Saw Blade with 5/8-Inch Arbor Review

Buy From Amazon.com

Forrest WW10407125 Woodworker II 10-Inch 40 Tooth ATB .125 Kerf Saw Blade with 5/8-Inch Arbor Feature

• This kerf saw saves 1/3 on wood loss for each cut
• Feeds easily when used for moderate rips and crosscuts on a table saw
• Reduces jump in for better pull control
• Eliminates bottom splintering on radial crosscuts
• The new 30-degree ATB tooth style stops the blade totally

Forrest Premium Carbide Saw Blades cut cleaner, more efficiently, and last longer between sharpenings than almost any other blade.They feature super hard, long life micro-grain carbide teeth on laser-cut plates that are hand-straightened to a maximum runout of .002". These top quality blades rip and crosscut super smooth and tear-out free. All are 10" diameter and fit 5/8" arbors. Made in the USA, the Woodworker II ATB blade is the most popular for general table saw use. It has a plate thickness of .090, and the kerf is 1/8". If most of your cutting is stock 1-1/2" or thicker, Forrest recommends its 30-tooth blade (#85N53).

Buy From Amazon.com

General International 50-EB3 Osborne Excalibur Miter Gauge

General International 50-EB3 Osborne Excalibur Miter Gauge Review

Buy From Amazon.com

General International 50-EB3 Osborne Excalibur Miter Gauge Feature

• Solid triangular design for tight miter joints
• Sliding stop flips up out of the way when not in use
• Easy to read index graduations
• Patented extension arm assembly makes it quick and easy to find any angle and lock it securely in place
• The fence can be adjusted from side to side allowing tight clearance to the blade

The EB-3 features a patented triangular design that offers rock solid support of the work piece at any angle setting and anywhere on its face. Equipped with a sliding stop that flips up out of the way when not in use and a telescopic fence extension that can offer work piece support up to 42 In. from the blade, the EB-3 is a very practical addition to any table saw. The patented extension arm assembly makes it possible to quickly and easily find any angle and lock it securely in place, and the precision centerset plunger auto-locates common angles quickly. The fence can be adjusted from side to side allowing tight clearance to the blade for clean precision crosscuts and the entire assembly is reversible in seconds for use in either miter slot. A removable heavy-duty steel T-slot washer holds the guide bar snug to the table, and the 3 guide bar expansions screws allow for a custom fit to

Buy From Amazon.com

Freud D0840S Diablo 8-1/2-Inch 40 Tooth ATB Fine Finishing Miter Saw Blade with 5/8-Inch Arbor

Freud D0840S Diablo 8-1/2-Inch 40 Tooth ATB Fine Finishing Miter Saw Blade with 5/8-Inch Arbor Review

Buy From Amazon.com

Freud D0840S Diablo 8-1/2-Inch 40 Tooth ATB Fine Finishing Miter Saw Blade with 5/8-Inch Arbor Feature

• Laser cut stabilizer vents trap noise and vibration keeping it cool and reducing blade warp
• Laser cut heat expansion slots allow blade to expand due to heat build-up keeping the cut true and straight
• Durable micrograin titanium carbide for extreme durability, razor-sharp cuts, and long life
• Tri-metal shock resistant brazing allows carbide tips to withstand extreme impact for maximum durability
• Laser cut arbor for accurate blade rotation reducing vibration and premature wear

This Diablo saw blade is designed to meet the needs of the construction and remodeling market. This advanced laser cut blade features a thin kerf, making it ideal for portable and low powered saws on the jobsite. A permanent Perma-SHIELD coating keeps this blade free from gumming and corrosion, and laser-cut stabilizer vents reduce vibration and heat buildup for more precise cuts and longer cutting life. This particular blade is the ideal choice for trim carpenters because it leaves a smooth surface that requires little to no sanding. It's ideal for crosscutting oak, pine, melamine, plywood, and moulding.

Buy From Amazon.com

Bosch PRO1296VF 12-Inch 96 Tooth ATB Crosscutting Saw Blade with 1-Inch Arbor

Bosch PRO1296VF 12-Inch 96 Tooth ATB Crosscutting Saw Blade with 1-Inch Arbor Review

Buy From Amazon.com

Bosch PRO1296VF 12-Inch 96 Tooth ATB Crosscutting Saw Blade with 1-Inch Arbor Feature

• Computer-designed laser cut slots in body to reduce noise and vibration up to 60%
• Exceptionally fine finish that virutally eliminates sanding and fitting of parts

Includes 12" 96-Tooth Noise/Vibration Reduced Woodworking Saw Blade - PRO1296VF

Buy From Amazon.com

Factory-Reconditioned Makita LS1016L-R 10-in Dual Slide Compound Miter Saw with Laser

Factory-Reconditioned Makita LS1016L-R 10-in Dual Slide Compound Miter Saw with Laser Review

Buy From Amazon.com

Factory-Reconditioned Makita LS1016L-R 10-in Dual Slide Compound Miter Saw with Laser Feature

• Compact design with a patented 4-Steel Rail Sliding System further increases rigidity to produce superior cuts
• Exclusive 6 linear ball bearings deliver smooth, solid, and adjustment-free dead-on accurate cuts
• Increased capacity for up to 6-5/8-in. crown molding (vertically nested), 4-3/4-in. baseboard (vertical), and 12-in. cross cuts at 90 degrees
• Innovative direct drive gearbox and guard system is engineered for increased vertical cutting capacity
• Miters 0 - 52 degress left and 0 - 60 degrees right, with positive stops at 0, 15, 22.5, 31.6, and 45 (left and right)

This is a factory reconditioned product. Reconditioned generally means that the product has been returned to the manufacturer, who brings the product back to like new condition. Some products may contain cosmetic blemishes. Includes 10-in Dual Slide Compound Miter Saw w/ Laser - LS1016L-R, Vertical Vise - 122854-6, Socket Wrench #13 - 782232-8, Hex Wrench - 783208-8, Dust Bag - 122852-0, Triangular Rule - 762001-3

Buy From Amazon.com

Shop Fox D3201 Aluminum Miter Box Large

Shop Fox D3201 Aluminum Miter Box Large Review

Buy From Amazon.com

Shop Fox D3201 Aluminum Miter Box Large Feature

• 9-7/8-Inch wide by 2-Inch deep by 2-3/4-Inch tall

This Shop Fox D3201 large aluminum miter box is used to guide saws in making miter saw cross cuts. It is a trough like box that is open at the ends and has guide slots to saw by. It features 90�� and 45�� left and right miter slots for hand cutting perfect miters. This large miter box has slide in composite wood bottoms to protect saw teeth and prevent tear out. It measures 9-7/8' W x 2' D x 2-3/4' H.9-7/8-Inch wide by 2-Inch deep by 2-3/4-Inch tall

Buy From Amazon.com